The Applicable Standard for RFID Device in Indonesia

Posted by Admin on Feb 10, 2010 in Type Approval Guide | Comments Off

Applicable Standards in Indonesia

RFID approval test will be based on national standard: KEPDIRJEN No.214/DIRJEN/2005 for RFID operation in 13.56 MHz, with the key parameters are as follows:

  • Radiated Emission Limits
    RFID Type Approval Guide In Indonesia Based on Government Regulation
  • Error Frequency shall be below 50 KHz
  • The Transmission power shall be below 10mW (ERP)

Another kind of RFID approval test will be based on national standar: KEPDIRJEN No.221/DIRJEN/2007 for RFID Operated in 923 – 925 MHz, with the key parameters as follows:

  • Radiated Emmision Limits
    RFID type Approval Guide
  • Tag utilized shall be passive tags
  • Total bandwidth utilization shall be 2 MHz with maximum hopping channel 500 KHz
  • The transmission power shall be below 2000mW (ERP)
  • Modulation technique: Frequency Hopping Spread Spectrum (FHSS)
  • Transmitter antenna shall be embedded with +/- 6 dBi, 5 Omega
  • Error Frequency: +/-20 ppm from center frequency
  • Communication ports:UART, RS-232, RS-485, USB, Serial, Parallel, LAN, WLAN, WAN
  • Receiver Sensitivity: max 28dBµV/m or -96dBm, with impedance input 50 Omega

More detail about RFID Type Approval Guide in Indonesia (196)

Comments are closed.